Schedule A Demo
Thank you for your interest in PowerPlex®. Are you ready for a guided look at how PowerPlex® works and what it can do for your yachts? Schedule a demo now!
1-800-462-9979
usinfo@e-t-a.com
Thank you for your interest in PowerPlex®. Are you ready for a guided look at how PowerPlex® works and what it can do for your yachts? Schedule a demo now!
The PowerPlex® AC Module is a 14-channel power distribution unit equipped with either E-T-A single pole or double pole 8345 circuit breakers with full remote operation. With the remote circuit protection device installed, all AC loads are protected for short circuit and
overload conditions and are completely remote controlled through the PowerPlex® software to allow easy on/off operation. For additional protection, the AC module also has manual override functionality.
The PowerPlex® Mini Module has been designed for stationary installation. This PowerPlex® module is used for loads up to 1.5 A. Thanks to its properties it is often used for dimming LEDs or also as a pure measuring module. We recommend to install the modules in close proximity to the loads to be controlled.
The PowerPlex® Gateway is a multiprotocol module to connect PowerPlex® systems with other networks. It allows the combination of a PowerPlex® CAN bus with various other bus systems: CAN (e.g. NMEA2000, SAE J1939), Modbus.
The PowerPlex® Gateway allows transmission of I/O data between PowerPlex® products and devices on other bus systems. It automatically translates and filters incoming messages so only relevant data is transmitted or received. This ensures a consistent flow of information for controlling and monitoring the entire system.
Both buses are connected to the gateway and are galvanically isolated from each other. Configuration of the gateway is accomplished with software via the PowerPlex® CAN bus.
Two 120 Ω resistors terminate the CAN bus network, one at each end of the bus structure.
The PowerPlex® DC Battery Monitor offers eight multi-functional inputs, which can be used for measuring current, voltage and temperature on the DC battery strings. The Battery Monitor is available with two or four temperature sensors for use on multiple battery banks. It connects directly into the PowerPlex®® CANbus network through the E-T-A PowerPlex® Mini Module.
The PowerPlex® PM500 is E-T-A’s Power Module with physically isolated CAN bus interface as well as redundant protective functionality for connected DC loads. Similar to the PowerPlex® DC024, the device can control and monitor a total of twelve electrical loads. Each module has a manual override function for each 8 A and 25 A output via integral electro-mechanical mini circuit breakers. This manual override guarantees access to critical boat functions.
The PowerPlex® Keypads has been designed for stationary installation. It runs PowerPlex® Configuration Software, which can be directly downloaded from the E-T-A website. On demand the configuration software can also be made available on a USB flash drive.
The PowerPlex® HMI devices allow convenient visibility and intuitive operation. Visualize status, alarm or error messages. Select your preferred HMI from various keypads, touch displays for your PowerPlex® application. The PowerPlex® Suite allows you to create your own design. Designed to meet FCC Class A, Marine standard EN60945.
The PowerPlex® Web Server provides display, monitoring and control of a PowerPlex® system via smartphone, tablet, multi-function display or computer. Up to eight devices can be integrated into a system either via LAN.